DTC Detection Logic

DTC No.

Trouble diagnosis name

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0340

CMP SEN/CIRC-B1

[Camshaft position sensor (bank 1) circuit]

• The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
• The cylinder No. signal is not sent to ECM during engine running.
• The cylinder No. signal is not in the normal pattern during engine running.

• Harness or connectors

  [Camshaft position sensor (bank 1) circuit is open or shorted.]

• Camshaft position sensor (bank 1)
• Camshaft (INT)
• Starter motor
• Starting system circuit
• Dead (Weak) battery

P0345

CMP SEN/CIRC-B2

[Camshaft position sensor (bank 2) circuit]

• Harness or connectors

  [Camshaft position sensor (bank 2) circuit is open or shorted.]

• Camshaft position sensor (bank 2)
• Camshaft (INT)
• Starter motor
• Starting system circuit
• Dead (Weak) battery
• Sensor power supply 2