DTC Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always ignition switch OFF and wait at least 10 seconds before conducting the next test.

>>

GO TO 2.

1. Turn ignition switch ON.
2. Select "Data Monitor" in "SHIFT".
3. Select "SHIFT POSITION JUDGMENT".
4. Shift the selector lever as follows. (Hold the selector lever at each position for 2 seconds or more.)H → Nr → R → Nd → D/M → H
5. Turn ignition switch OFF.
6. Repeat step 1 to 5 five times.
7. Check DTC.

Is "P07EC-00 detected?

>>

Go to DTC Diagnosis Procedure .

>>

To check malfunction symptom before repair: Go to Intermittent Incident .

>>

Confirmation after repair: INSPECTION END