DTC Diagnosis Procedure

1. Check the steering force motor. Refer to Component Inspection .

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Steering force motor is malfunctioning. Replace steering column assembly. Refer to Removal and Installation .

1. 1. Disconnect steering force control module connector.
   2. Check the continuity between steering force control module harness connector and ground.

      Steering force control module		-	Continuity
      Connector	Terminal
      E153	35	Ground	No
      	36
      	37
      E154	38

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning component.

1. 1. Check enlarged contact spring of terminal. Refer to How to Check Terminal .
   2. Perform intermittent incident while turning steering wheel. Refer to Intermittent Incident .

Is the inspection result normal?

YES>>

Replace steering force control module. Refer to Removal and Installation .

NO>>

Repair or replace the malfunctioning component.