April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

Always perform the radar alignment after removing and installing or replacing the distance sensor.
CAUTION:
The system does not operate normally unless the radar alignment is performed. Always perform it.
Perform the ICC system action test to check that the ICC system operates normally.

PERFORM RADAR ALIGNMENT
Perform the radar alignment. Refer to Work Procedure .

>>

GO TO 2.
CHECK FEB SYSTEM SETTING
1. Start the engine.
2. Check that the FEB system setting can be enabled/disabled on the combination meter.
>>

INSPECTION END