"L" Circuit Open Test
- Turn ignition off. Check fuse No. 4 (7.5-amp), located in passenger compartment fuse/relay block. If fuse is faulty, replace fuse and recheck system. If fuse is okay, disconnect generator harness connector. Jumper generator harness connector terminal No. 3 (White/ Blue wire) to ground. See Figure . Turn ignition on. If CHARGE warning light illuminates, perform generator/regulator test. See GENERATOR/REGULATOR TEST . If test light does not illuminate, go to next step.
- Turn ignition off. Check for faulty CHARGE warning light bulb. Replace as necessary. If light bulb is okay, repair open in circuit between harness connector terminal No. 3 (White/Blue wire) and CHARGE warning light.