LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Commander 2WD V8-4.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Blower Motor Relay >> Service and Repair >> Controls - Front >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal







REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Open the cover of the power distribution center (PDC) (1) located in the engine compartment.
3. Remove the blower motor relay (2) from the PDC.
scientia non olet · About LEMON Manuals