LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Commander Overland, 4WD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System (Service Information) >> Rear >> Stabilizer Link >> Installation >> Stabilizer Link
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stabilizer Link

  1. Install the upper bolt for the stabilizer link to the frame and tighten to 102 N.m (75 ft. lbs.).
  2. Install the stabilizer link to the stabilizer bar.
  3. Install the nut and tighten to 122N.m (90 ft. lbs.).
  4. Remove the jack and lower the vehicle.
scientia non olet · About LEMON Manuals