IOD Fuse: Installation
WARNING: This page is about a different car, the 2008 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
It is extremely important that the Ignition Off Draw (IOD) fuses are fully seated into the Totally Integrated Power Module (TIPM) fuse cavities. Failure to install the fuses correctly could result in erratic electrical systems behavior.
- Remove TIPM cover.
- Insert fuse 7/8 into the TIPM. Push fuses down until they are fully seated in the TIPM cavities.
- Install the cover to the TIPM.