Spark Plug: Removal: Removal
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Each individual spark plug is located under each ignition coil. Each individual ignition coil must be removed to gain access to each spark plug. See Electrical/Ignition Control/COIL, Ignition - Removal .
- Remove necessary air filter tubing at throttle body.
- Prior to removing ignition coil, spray compressed air around coil base at cylinder head.
- Prior to removing spark plug, spray compressed air into cylinder head opening. This will help prevent foreign material from entering combustion chamber.
- Remove spark plug from cylinder head using a quality socket with a rubber or foam insert. Also check condition of ignition coil O-ring and replace as necessary.
- Inspect spark plug condition.