Bank 1

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect and isolate the negative battery cable.

Fig 1: Disconnecting/Connecting PCV Hose
Courtesy of CHRYSLER GROUP, LLC
Disconnect the right side PCV hose (2) from the supercharger and position aside.

Fig 2: TMAP Sensor, Connector & Screw
Courtesy of CHRYSLER GROUP, LLC
Clean the area around Temperature and Manifold Absolute Pressure (TMAP) sensor (2).
Disconnect the TMAP sensor wire harness connector (1).
Remove screw (3) and the TMAP sensor (2) from supercharger.