Bank 2

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Covers

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Remove the left side engine cover (1).

Fig 2: TMAP Sensor, Connector & Screw
Courtesy of CHRYSLER GROUP, LLC
Clean the area around the Temperature and Manifold Absolute Pressure (TMAP) sensor (3).
Disconnect the TMAP sensor wire harness connector (2).
Remove the screw (1) and the TMAP sensor (3).