Sensor, Differential Pressure: Installation: 6.4L
WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Differential Pressure Sensor (DPS) Metal Tubing Fitting, DPS Electrical Connector, DPS Hose & Bolt
- If removed, install the Differential Pressure Sensor (DPS) metal tubing fitting (4).
- Install the DPS (1) to the bracket.
- Install the DPS and bracket in vehicle.
- Connect the DPS hose.
- Lower the vehicle.
- Connect the negative battery cable.