Torque Specifications
WARNING: This page is about a different variant/trim than selected.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Balance Shaft Module | Refer to INSTALLATION Procedure. | ||
| Bell Housing-Bolts | 48 | 35 | - |
| Camshaft Bearing Cap-Bolts | |||
| M6 Bolts | 12 | - | 106 |
| M8 Bolts | 30 | 22 | - |
| Coils | 8 | - | 71 |
| Connecting Rod Cap-Bolts | 20 + 90° | 15 + 90° | - |
| Coolant Temperature Sender | 18 | 13 | - |
| Crankshaft Main Bearing Cap-Bolts | Refer to INSTALLATION Procedure. | ||
| Crankshaft Damper-Bolt | 210 | 155 | - |
| Cylinder Head-Bolts | Refer to INSTALLATION Procedure. | ||
| Cylinder Head Cover-Bolts | Refer to INSTALLATION Procedure. | ||
| Engine Support Bracket-Bolts | 40 | 30 | - |
| Exhaust Manifold-Bolts | 34 | 25 | - |
| Exhaust Manifold Heat Shield-Bolts | |||
| M6x25mm Bolts | 7 | - | 62 |
| M6x70mm Bolts | 9 | - | 80 |
| Flex Plate to Crankshaft-Bolts | 29 + 51° | 22 + 51° | - |
| Intake Manifold-Bolts | 24 | 18 | - |
| Ladder Frame | 22 | 16 | - |
| Oil Cooler Connector Bolt | 49 | 36 | - |
| Oil Filter | 14 | 10 | - |
| Oil Filter Nipple | 49 | 36 | - |
| Oil Jet Fastener | 12 | - | 106 |
| Oil Pan-Bolts | |||
| M6 Bolts | 9 | - | 80 |
| M8 Bolts | 24 | 18 | - |
| Oil Pan Drain-Plug | 40 | 30 | - |
| Oil Pressure Switch | 8 | - | 71 |
| PCV Valve | 5 | - | 44 |
| Phaser to Camshaft-Bolt | 59 | 44 | - |
| Spark Plugs | 27 | 20 | 239 |
| Timing Chain Cover | |||
| M6 Bolts | 9 | - | 80 |
| M8 Bolts | 26 | 19 | - |
| Timing Chain Tensioner Assembly-Bolts | 12 | - | 106 |
| Timing Chain Guides | 12 | - | 106 |