DRAINCOCK, Radiator: Installation: Installation
WARNING: This page is about a different variant/trim than selected.
| 1 - RADIATOR TANK |
| 2 - DRAINCOCK |
- Align draincock stem to radiator tank opening.
- Push draincock (2) into the radiator tank opening.
- Tighten the draincock (2) by turning clockwise until it stops.
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Install front passenger side splash shield assembly to the wheelhouse area. Refer to SHIELD, SPLASH, FRONT WHEEL HOUSE, INSTALLATION or SHIELD, SPLASH, REAR WHEELHOUSE, INSTALLATION .
- Install the front passenger side wheel.