Liftgate Light Bar: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Place the liftgate light bar wiring harness through liftgate.
- Line up the four liftgate light bar retaining screws and install (Figure ) and (Figure ).
- Connect the liftgate light bar electrical connector inside the liftgate.
- Install the liftgate inner trim panel (Refer to TRIM PANEL ).
- Connect the battery negative cable.
- Verify vehicle and system operation.
- Close hood.