Inspection Procedure
WARNING: This page is about a different car, the 2005 Lexus GS 430 and 2005 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Check the mark display. (At a place with a fine view, is GPS mark displayed or not?)
- No: Go to step 7 .
- Yes: Go to next step.
- Does the trouble occur in the specific area or not?
- YES: Normal (If the vehicle is positioned in the place where it is difficult to be identified, the current vehicle position may be incorrectly displayed.)
- NO: Go to next step.
- Check the setting (Color of the automatic calibration button on the calibration screen).
- Green: Normal. (Drive the vehicle (10 km or more) until calibration is completed.
- Blue: Go to next step.
- Service check mode. (Is "58-43" displayed in the unit check mode of the navigation ECU?)
- YES: Troubleshoot for each diagnosis.
- NO: Go to next step.
- Navigation check mode (vehicle signal check mode: SPD).
- NG: Replace or repair speed sensor wire harness.
- OK: Go to next step.
- Is there anything such as a film stuck to the window or any metal object on the instrument panel?
- YES: Reception may be affected by a screen such as a film.
- NO: Go to next step.
- Recurrence Test (Confirm the phenomenon) (Correct the current position and drive the vehicle for a while with the GPS mark displayed).
- OK: Normal.
- OK: Replace the navigation ECU.
- Check if the harness is caught or sharply bent or not.
- NG: Navigation antenna is surely connected.
- OK: Go to next step.
- Check optional components. (Does it become if the optionals such as the theft deterrent system is removed?)
- YES: Remove or change the position of the components.
HINT:
Some optionals receive radio signals, and if this happens, GPS reception may be affected.
- NO: Go to next step.
- YES: Remove or change the position of the components.
- Is there anything such as a film stuck to the window?
- YES: Reception may be affected by a screen such as a film.
- NO: Go to next step.
- Service check mode. (Is "80-40, 41" is displayed in the unit check mode of the navigation ECU?)
- YES: Troubleshoot for each diagnosis.
- OK: Replace the navigation antenna.
HINT:
If the trouble still occurs, replace the navigation ECU.