Section 114 (Generators & Regulators): Replacement

WARNING: This page is about a different car, the 2004 Lexus GS 300 and 2003 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

Cracks on the rib side of a drive belt are considered acceptable. If the drive belt has chunks missing from the ribs, it should be replaced.

Fig 1: Inspecting Drive Belt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
The drive belt tension can be released by turning the belt tensioner clockwise.

Fig 2: Turning Belt Tensioner Clockwise
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002