Vehicle Speed Sensor: Service and Repair

ON-VEHICLE REPAIR





1. DISCONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR





2. REMOVE NO. 1 VEHICLE SPEED SENSOR
Remove the bolt and the NO. 1 vehicle speed sensor.
3. DISASSEMBLE NO. 1 VEHICLE SPEED SENSOR
a. Remove the O-ring from the speedometer driven gear assembly.
b. Remove the clip and speedometer driven gear from the speedometer driven gear sleeve.
4. ASSEMBLE NO. 1 VEHICLE SPEED SENSOR
a. Install the speedometer driven gear and clip to the speedometer driven gear sleeve.
b. Coat a new O-ring with ATF.
c. Install the O-ring to the speedometer driven gear assembly.
5. INSTALL NO. 1 VEHICLE SPEED SENSOR
Install the NO. 1 vehicle speed sensor with the bolt.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)





6. CONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR





7. DISCONNECT NO. 2 VEHICLE SPEED SENSOR CONNECTOR
8. REMOVE NO. 2 VEHICLE SPEED SENSOR
a. Remove the bolt and NO. 2 vehicle speed sensor.





b. Remove the O-ring from the NO. 2 vehicle speed sensor.





9. INSTALL NO. 2 VEHICLE SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the NO. 2 vehicle speed sensor.
b. Install the NO. 2 vehicle speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
10. CONNECT NO. 2 VEHICLE SPEED SENSOR CONNECTOR