LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (LEXUS Navigation System - Diagnosis) >> Touch Switch Does Not Function (Navigation Screen Only) >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISPLAY CHECK MODE (TOUCH SWITCH, TOUCH POINT CHECK) 
    1. Perform display check mode.
      1. Start the diagnosis system and perform the touch switch and touch point check.
    1. NG: CHECK AND REPLACE MULTI-DISPLAY (CRT DISPLAY) DISPLAY 
    2. OK: Go to next step. 
  2. REMOVE OPTIONAL PARTS 
    1. Remove optional parts (Cellular mobile telephone).
      1. Disconnect the cellular mobile telephone wire harness.
      2. Connect the wire harness of the navigation system so that the cellular mobile telephone is not linked.
    2. Check that the malfunction disappears when operating the navigation system again.
      Fig 1: Malfunction Table (cellular Mobile Telephone)
      G01449726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. A: Go to next step. 
    2. B: CHECK AND REPLACE TELEPHONE COMPUTER AND WIRE HARNESS 
  3. CHECK SWITCH (BEEP SOUND) 
    1. Check switch.
      1. Check that the beep sounds when touch switch is pressed.
    1. NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 
    2. OK: CHECK AND REPLACE NAVIGATION ECU