Typical Enabling Conditions
WARNING: This page is about a different car, the 2005 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
All:
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE (All)
| The monitor will run whenever these DTCs are not present | See LIST OF DISABLE A MONITOR |
Knock Sensor Range Check P0327, P0328, P0332, P0330:
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE (KNOCK SENSOR RANGE CHECK P0327, P0328, P0332, P0330)
| Battery voltage | 10.5 V or more |
| Time after engine start | 5 seconds or more |
| Ignition switch | ON |
| Starter | OFF |