Section 466 (Combination Meter): Disassembly

WARNING: This page is about a different car, the 2005 Lexus GS 430 and 2005 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT TELLTALE LIGHT ASSEMBLY CONNECTOR

Fig 1: Disconnecting Telltale Light Assembly Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE METER COVER
1. Disengage a claw.
2. Remove the 4 screws and the meter cover.
  
  Fig 2: Removing Meter Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECU PLATE
1. Disconnect the 4 flat circuit plates.
2. Remove the 16 clips and the ECU plate.
  
  Fig 3: Removing ECU Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE METER GLASS
Remove the 3 screws and the meter glass.

Fig 5: Removing Meter Glass
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE TACHOMETER, FUEL RECEIVER GAUGE AND ENGINE COOLANT TEMPERATURE RECEIVER GAUGE
Remove the 4 screws.

Fig 8: Removing Tachometer, Fuel Receiver Gauge And Engine Coolant Temperature Receiver Gauge
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COLD CATHODE TUBE WITH PLATE

Fig 9: Removing Cold Cathode Tube With Plate
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002