DTC P0325: Knock Sensor 1 Circuit (Bank 1 Or Single Sensor) & DTC P0330: Knock Sensor 2 Circuit (Bank 2): Notes

WARNING: This page is about a different car, the 2003 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If ECM replacement is instructed in following testing, always ensure ECM connectors and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS article in GENERAL INFORMATION.

NOTE: For component location, see appropriate illustration in THEORY & OPERATION article.