How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
- VEHICLE BROUGHT TO WORKSHOP
- GO TO NEXT STEP
- CUSTOMER PROBLEM ANALYSIS CHECK AND PROBLEM SYMPTOM CONFIRMATION
- GO TO NEXT STEP
- INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE BODY MULTIPLEX COMMUNICATION SYSTEM (BEAN)
- Check that there is no abnormality in the communication system by inspecting the communication function of the body multiplex communication system with the hand-held tester.
- (ECU unconnected, communication line abnormal) Without code output, proceed to A.
- (ECU unconnected, communication line abnormal) With code output, proceed to B.
- B: GO TO MULTIPLEX COMMUNICATION SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
- A: Go to next step.
- Check that there is no abnormality in the communication system by inspecting the communication function of the body multiplex communication system with the hand-held tester.
- (See
PROBLEM SYMPTOMS TABLE )
- Without applicable problem symptoms table, proceed to A.
- With an applicable problem symptoms table, proceed to B.
- B: GO TO STEP 6 .
- A: Go to next step.
- ACCORDING TO PROBLEM SYMPTOM, PERFORM TROUBLESHOOTING
- (See
PRE-CHECK )
- Inspection with the hand-held tester (ECU data monitor)
- Inspection with the hand-held tester (Active test)
- (See TERMINALS OF ECU )
- (See
PRE-CHECK )
- ADJUST, REPAIR OR REPLACE
- GO TO NEXT STEP
- CONFIRMATION TEST
- END