LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2004 >> LS 430 >> Repair and Diagnosis >> General Information >> Identification >> Introduction >> Repair Instruction >> Precaution >> Removal And Installation Of Engine Intake Parts
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation Of Engine Intake Parts

Fig 1: Covering Engine Intake Parts And Engine Openings With Clean Shop Rags And Gummed Tape
G03693776Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. If any metal particle enters the inlet pass, this may damage the engine.
  2. When removing and installing the inlet system parts, cover the openings of the removed parts and engine openings. Use clean shop rags, gummed tape, or other suitable materials.
  3. When installing the inlet system parts, check that no metal particles have entered the engine or the installed part.
scientia non olet · About LEMON Manuals