Inspection Procedure

WARNING: This page is about a different car, the 2005 Lexus RX 330. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BLUETOOTH SETTINGS
1. Check if the Bluetooth settings are correct.
  OK: Bluetooth settings are correct.
1. NG: SET CORRECTLY
2. OK: Go to next step.
CHECK CELLULAR PHONE
1. Check if the cellular phone is Bluetooth compatible.
  HINT:
  
  Some versions of Bluetooth compatible cellular phones may not function.
  
  OK: The phone is Bluetooth compatible.
1. NG: END (ONLY A BLUETOOTH COMPATIBLE CELLULAR PHONE CAN BE USED)
2. OK: Go to next step.
CHECK SETTINGS
1. Check if the cellular phone functions.
  HINT:
  
  The cellular phone is unable to call under any of the following conditions:
  - The cellular phone is locked.
  - The directory is being transferred.
  - The line is crossed.
  - Transmission is regulated.
  - The power is off.
  - The cellular phone is not connected to Bluetooth ("BT" is displayed while a connection is established).
    OK: None of the above conditions exist.
1. NG: SET CORRECTLY
2. OK: Go to next step.
CHECK CELLULAR PHONE
1. Check if a call can be made from the cellular phone.
  HINT:
  
  When the battery is low, calls cannot be made or received.
  
  OK: A call can be made from the cellular phone.
1. NG: REPLACE CELLULAR PHONE
2. OK: Go to next step.
CHECK RECEPTION
1. Put a cellular phone into a receiving state.
2. Place the cellular phone close to the multi-display.
3. Check if the cellular phone has reception in accordance with the multi-display.
  OK: The cellular phone has reception.
1. NG: REPLACE MULTI-DISPLAY (SEE MULTI-DISPLAY ASSY )
2. OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE