DTC Check/Clear
WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Prepare the intelligent tester.
- Connect the intelligent tester to the DLC3 at the lower part of the instrument panel.
- Turn the ignition switch to the ON position and turn the intelligent tester on.
- Use the intelligent tester to check the DTCs and the freeze frame data, and note or print the result (See the operator's manual for operating instructions).
- Confirm the details of the DTCs (See DIAGNOSTIC TROUBLE CODE TABLE ).
- CLEAR DTC
- The following procedures clear the DTCs and freeze frame data.
- When using the intelligent tester:
Operate the intelligent tester. (See the operator's manual for operating instructions).
- When not using the intelligent tester:
Disconnect the battery terminals.
- When using the intelligent tester:
- The following procedures clear the DTCs and freeze frame data.