Cruise Control System: Precaution
WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When disconnecting the negative (-) battery terminal, initialize the following system after the terminal is reconnected.
SYSTEM TABLE
| System Name | Information |
|---|---|
| Lighting System | INITIALIZATION |
| Power Door Lock Control System | |
| Power Window Control System | |
| Rower Back Door System | |
| Sliding Roof System (for Multi-panel Moon Roof) | |
| Sliding Roof System (for Standard) |
- HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
- Turn the cruise control main switch off when not using the cruise control system.
- Be careful as the vehicle speed increases when driving downhill with the cruise control system on.
- The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is operating, the + (ACCEL) function operates. When the cruise control system is not operating, the RES (RESUME) function operates.
- If the CRUISE main indicator light blinks while the cruise control system is operating, turn the cruise control main switch off to reset the cruise control system. After the reset, if the cruise control main switch cannot be turned on, or the cruise control system is canceled immediately after turning the cruise control main switch on, the system may have a malfunction.
- Do not use the cruise control system where the road conditions are as follows:
- Heavy traffic
- Steep decline
- Roads with sharp turns
- Icy or snowy roads
- Slippery roads