BLUETOOTH Tel Check Mode

HINT:

Graphics may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE  (See DTC CHECK/CLEAR  )
2. "BLUETOOTH" TEL CHECK 
   1. Select ""Bluetooth" TEL Check" from the "Diagnosis MENU" screen.
      Fig 1: Diagnostic Tool Display - Bluetooth TEL Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. "BLUETOOTH" CHECK 
   1. Select ""Bluetooth" Check" from the ""Bluetooth" Handsfree Check Menu" screen.
      Fig 2: Bluetooth Handsfree Check Menu Screen Display - Bluetooth Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Select "Serial Communication Log" from the ""Bluetooth" Check Menu" screen.
      Fig 3: Diagnostic Tool Display - Serial Communication Log

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. The communication log data in the display ECU are displayed on this screen.

         HINT:

         The displayed data can be used as a reference.

         Fig 4: Identifying Diagnostic Tool Display - Serial Communication Log

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Select "Software Version" from the ""Bluetooth" Check Menu" screen.
      Fig 5: Bluetooth Check Menu Screen Display - Software Version

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Check the software version of the "Bluetooth" module.
         Fig 6: Identifying Diagnostic Tool Display - Software Version

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

         Screen Description: 

         SCREEN DESCRIPTION TABLE
         
         

         Display	Contents
         General version/*1	General software version of "Bluetooth" module is displayed. If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.
         API version/*2	API software version is displayed.
         Upper stack version/*3	Upper Stack version is displayed.
         Lower stack version/*4	Lower Stack version is displayed.

         HINT:

         This function is controlled by the built-in display ECU.

4. HANDSFREE VOICE QUALITY SET 
   1. Select "Handsfree Voice Quality Set" from the ""Bluetooth" Handsfree Check Menu" screen.
      Fig 7: Bluetooth Handsfree Check Menu Screen Display - Handsfree Voice Quality Set

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check the handsfree voice level.
      Fig 8: Identifying Display Screen - Handsfree Voice Level

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Screen Description: 

      SCREEN DESCRIPTION TABLE
      
      

      Display	Contents
      Received voice level adjustment	Setting possible for the voice level received from "Bluetooth" compatible phones.
      Sent voice level adjustments	Setting possible for the voice level sent to "Bluetooth" compatible phones.

      HINT:

      This function is controlled by the built-in display ECU.

      NOTE: "Voice Quality Type" should not be changed.