Inspection Procedure
WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK MULTI-DISPLAY
- Turn the ignition switch to the ACC position.
- Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.
OK:
The disc is ejected.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: Go to Next Step
- CHECK MAP DISC
- Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on the map disc.
NG: REPLACE MAP DISC
OK: END
- Check that the map disc is not deformed or cracked.