Center Cluster Integration Switch: Reassembly

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MULTI INFORMATION DISPLAY SUB-ASSEMBLY
1. Install the multi information display sub-assembly with the 2 screws.
  
  Fig 1: Identifying Multi Information Display Sub-Assembly With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the cable with the connector.
  
  Fig 2: Identifying Cable With Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEATER CONTROL HOUSING SUB-ASSEMBLY
1. Install the heater control housing sub-assembly with the 4 screws.
  
  Fig 3: Identifying Heater Control Housing Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEATER CONTROL BASE BRACKET RH
1. Install the heater control base bracket RH with the 2 bolts.
  
  Fig 4: Identifying Heater Control Base Bracket RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEATER CONTROL BASE BRACKET LH
1. Install the heater control base bracket LH with the 2 bolts.
  
  Fig 5: Identifying Heater Control Base Bracket LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002