Inspection Procedure
WARNING: This page is about a different car, the 2004 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
- Service check mode. (Check the navigation ECU)
- NG: Troubleshoot for each diagnosis.
- OK: Replace multi-display.
- Ncon
- Check the navigation ECU power source circuit (see
POWER SOURCE CIRCUIT (NAVIGATION ECU) ).
- NG: Replace or repair wire harness or connector.
- OK: Go to next step
- Check wire harness and connector between multi display and navigation ECU (See
HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
).
- NG: Repair or replace wire harness or connector.
- OK: Check and replace multi display.