LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> License Plate Light Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

License Plate Light Assembly: Installation

  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Engage the 2 claws and install the license plate light assembly.
    2. Connect the connector.
      Fig 1: Identifying License Plate Light Assembly Claws
      G05252455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/ Rear View Monitor System)  (See INSTALLATION )
  4. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)  (See INSTALLATION )
  5. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY  (See INSTALLATION )
  6. INSTALL REAR LIGHT ASSEMBLY LH (See  INSTALLATION   ) 
  7. INSTALL REAR LIGHT ASSEMBLY RH 

    HINT:

    Use the same procedures for the RH side and the LH side.

  8. INSTALL LUGGAGE COMPARTMENT DOOR COVER  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See INSTALLATION )
  10. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE  (See INSTALLATION )
  11. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
scientia non olet · About LEMON Manuals