LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Light Failure Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Light Failure Sensor: Removal

  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT 
  2. REMOVE SPARE WHEEL COVER 
  3. REMOVE SPARE WHEEL COVER TRAY 
  4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY  (See ON-VEHICLE INSPECTION )
  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See DISASSEMBLY )
  6. REMOVE REAR FLOOR FINISH PLATE  (See DISASSEMBLY )
  7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH  (See DISASSEMBLY )
  8. REMOVE LIGHT FAILURE SENSOR 
    1. Disengage the connector.
    2. Disengage the clamp and remove the light failure sensor.
      Fig 1: Locating Light Failure Sensor Connector
      G05252547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals