Turn Signal Flasher Assembly: Installation

INSTALL TURN SIGNAL FLASHER ASSEMBLY
1. Install the clamp and the turn signal flasher assembly.
2. Connect the connector.
  
  Fig 1: Locating Turn Signal Flasher Assembly Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 SWITCH HOLE BASE (See INSTALLATION )
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER LH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (See INSTALLATION )