Seat Memory Switch: Inspection
- INSPECT SEAT MEMORY SWITCH LH
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Switch Position Specified Condition I6-1 (E) - I6-2 (MMRY) SET switch is pressed Below 1 Ω SET switch is not pressed 10 kΩ or higher I6-1 (E) - I6-3 (2) M2 switch is pressed Below 1 Ω M2 switch is not pressed 10 kΩ or higher I6-1 (E) - I6-4 (1) M1 switch is pressed Below 1 Ω M1 switch is not pressed 10 kΩ or higher If the result is not as specified, replace the switch.
- Measure the resistance according to the value(s) in the table below.
- INSPECT SEAT MEMORY SWITCH RH
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Switch Position Specified Condition H7-1 (E) - H7-2 (MRY) SET switch is pressed Below 1 Ω SET switch is not pressed 10 kΩ or higher H7-1 (E) - H7-3 (M2) M2 switch is pressed Below 1 Ω M2 switch is not pressed 10 kΩ or higher H7-1 (E) - H7-4 (M1) M1 switch is pressed Below 1 Ω M1 switch is not pressed 10 kΩ or higher If the result is not as specified, replace the switch.
- Measure the resistance according to the value(s) in the table below.