LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, Active Control Engine Mount System (Including DTC P16A0 - P16A4), On-Vehicle Inspection, Removal, Inspection & Installation >> Active Control Engine Mount >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT ACTIVE ENGINE MOUNTING 
    1. Inspect the active engine mounting.
      1. Connect the intelligent tester to DLC3.
        Fig 1: Connecting Intelligent Tester To DLC3
        G05247599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Start the engine and turn the intelligent tester on.
      3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / E-ACM / ACTIVE TEST.
        ITEM SPECIFICATION

        Item Test Details Diagnostic Note
        CHECK THE E-ACM [Tester Details]
        Operate the E-ACM actuator
        [Vehicle Condition]
        Engine running        		 -
      4. Check if the active mount control operates.

        Standard: 

        The active mount control operates normally. 

scientia non olet · About LEMON Manuals