Active Control Engine Mount: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE ENGINE UNDER COVER LH
REMOVE ENGINE UNDER COVER RH
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER INLET ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE ENGINE MOUNTING BRACKET FR
HINT:

Securely support the automatic transaxle using a jack.
1. Disconnect the 2 connectors and clamp.
  
  Fig 1: Identifying Connectors & Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and disconnect the earth cable.
  
  Fig 2: Identifying Earth Cable With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 4 bolts and engine mounting bracket FR.
  
  Fig 3: Identifying Engine Mounting Bracket FR With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ACTIVE CONTROL ENGINE MOUNT
1. Remove the 3 nuts and active control engine mount.
  
  Fig 4: Identifying Active Control Engine Mount With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 nuts and acceleration sensor.
  
  Fig 5: Identifying Acceleration Sensor With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002