Engine Coolant Temperature Sensor: Removal
- REMOVE ENGINE UNDER COVER LH
- REMOVE ENGINE UNDER COVER RH
- DRAIN ENGINE COOLANT
(See ON-VEHICLE INSPECTION
)
- REMOVE V-BANK COVER SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE COOL AIR INTAKE DUCT SEAL
(See REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER LH
(See REMOVAL
)
- REMOVE AIR CLEANER INLET ASSEMBLY
(See REMOVAL
)
- REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL
)
- REMOVE AIR CLEANER CASE SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE NO. 1 AIR CLEANER INLET
(See REMOVAL
)
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Remove the engine coolant temperature sensor connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the engine coolant temperature sensor.
- Remove the gasket from the engine coolant temperature sensor.