LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, Active Control Engine Mount System (Including DTC P16A0 - P16A4), On-Vehicle Inspection, Removal, Inspection & Installation >> IG2 Relay >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

IG2 Relay: Inspection

  1. INSPECT IG2 RELAY 
    1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE REFERENCE TABLE

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (Battery voltage applied between terminals 1 and 2)
      Fig 1: Inspecting IG2 Relay
      G04942983Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the relay.

scientia non olet · About LEMON Manuals