Transmission Wire: Installation

INSTALL TRANSMISSION WIRE
1. Coat the O-ring with ATF.
  
  Fig 1: Locating O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Coat the bolt with ATF.
3. Install the transmission wire and lock plate to the valve body with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 2: Locating Bolt, Lock Plate And Transmission Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the transmission wire to the clamp.
5. Connect the 9 connectors.
INSTALL TRANSMISSION VALVE BODY ASSEMBLY (See REMOVAL )
INSTALL VALVE BODY OIL STRAINER ASSEMBLY (See INSTALLATION )
INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY (See INSTALLATION )
INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT:

(See INSTALLATION )