Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK MAP DISC 
   1. Check that the map disc is not deformed or cracked.

      OK: 

      No deformations or cracks on the map disc. 

   Fig 1: Checking Disc For Deformed Or Cracked

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NG: Go to step   4 

   OK: Go to next step 

2. DISC CLEANING 
   1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
      NOTE: Do not use a conventional record cleaner or antistatic preservative.
   Fig 2: Cleaning Disc With Soft Cloth

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. DTC CLEAR AND RECHECK 
   1. Clear the DTCs (see DTC CHECK / CLEAR ).
   2. Recheck for DTCs and check if the same trouble occurs again.

      OK: 

      Same problem does not occur. 

   OK: END 

   NG: Go to next step 

4. REPLACE MAP DISC 
   1. Replace the map disc.
   2. Clear the DTCs and recheck for DTCs.
   3. Check if the same trouble occurs again.

      OK: 

      Same problem does not occur. 

   OK: END 

   NG: REPLACE NAVIGATION ECU