Speed Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SPEED SENSOR
1. Install the speed sensor (SP2).
  1. Coat a new O-ring with ATF and install it to the speed sensor.
  2. Install the speed sensor with the bolt.
    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  3. Connect the speed sensor connector.
  Fig 1: Locating Speed Sensor Connector And Speed Sensor Bolt (SP2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the speed sensor (NT).
  1. Coat a new O-ring with ATF and install it to the speed sensor.
  2. Install the speed sensor with the bolt.
    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  3. Connect the speed sensor connector.
Fig 2: Locating Speed Sensor Connector And Speed Sensor Bolt (NT)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002