Integration Relay: Installation
WARNING: This page is about a different car, the 2007 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL INTEGRATION RELAY
- Connect the 3 connectors.
- Attach the integration relay to the engine room No. 2 junction block.
- Install the engine room No. 2 junction block cover.
- REMOVE ENGINE ROOM SIDE COVER LH (See CAMSHAFT POSITION SENSOR )
- REMOVE COOL AIR INTAKE DUCT SEAL (See CAMSHAFT POSITION SENSOR )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).