Dynamic Radar Cruise Control System: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE UNDER COVER (See REMOVAL )
REMOVE FRONT FENDER LINER LH (See REMOVAL )
REMOVE FRONT FENDER LINER RH (See REMOVAL )
REMOVE FRONT BUMPER COVER (See REMOVAL )
REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
1. Disconnect the connector.
2. Remove the 3 bolts and sensor.
  
  Fig 1: Locating Bolts And Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002