Fog Light Assembly: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. INSTALL FOG LIGHT BULB 
   1. Turn the fog light bulb in the direction indicated by the arrow and install it.
      Fig 1: Turning Fog Light Bulb

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FOG LIGHT ASSEMBLY 
   1. Attach the 2 claws and install the fog light.
      Fig 2: Identifying Fog Light Claws And Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the bolt.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
4. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
5. ADJUST FOG LIGHT AIM 

   (See REMOVAL )