Transfer Valve Body Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSFER CONTROL SOLENOID (See REASSEMBLY )
INSTALL TRANSFER VALVE BODY ASSEMBLY
1. Connect the transfer wire connector to the transfer control solenoid.
2. Install the transfer upper valve body with the 4 bolts.
  
  Fig 1: Locating Bolts And Transfer Upper Valve Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
INSTALL TRANSFER OIL PAN (See INSTALLATION )
INSTALL TRANSFER DYNAMIC DAMPER (See INSTALLATION )
INSTALL ENGINE REAR MOUNTING MEMBER (See INSTALLATION )
INSTALL FRONT EXHAUST PIPE ASSEMBLY
(See INSTALLATION )
ADD AUTOMATIC TRANSMISSION FLUID (See COMPONENTS )
CHECK FOR EXHAUST GAS LEAKS