Front Axle Hub: Reassembly

INSTALL FRONT AXLE HUB SPACER
1. Using a brass bar and a hammer, install a new front axle hub spacer.
NOTE: Do not damage the spacer.

Fig 1: Installing Front Axle Hub Spacer
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
1. Using SST and a press, install a new bearing to the front axle hub.
  SST 09649-17010
  
  HINT:
  
  Preset the 4 bolts to the new bearing to the front axle hub.
  
  Fig 2: Installing Front Axle With ABS Rotor Bearing Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE HUB SUB-ASSEMBLY
1. Apply MP grease to a new O-ring.
2. Install the new O-ring to the axle hub.
  NOTE: Do not damage the speed sensor rotor.
3. Install the dust cover and axle hub to the steering knuckle with the 4 bolts.
  Torque: 80 N*m (816 kgf*cm, 59 ft.*lbf)
  
  Fig 3: Locating Front Axle Hub Sub-Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING KNUCKLE OIL SEAL
1. Using SST and a press, install a new steering knuckle oil seal.
  SST 09527-17011, 09950-70010 (09951-07100), 09951-01000
  
  Fig 4: Installing Steering Knuckle Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002