CD cannot be Inserted/Played or CD is Ejected Right After Insertion

1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.

   OK: Normal CD. 

   HINT:

   • Translucent or uniquely-shaped CDs cannot be played.
   • CDs with adhesive paper labels should not be played.
   • Commercial audio CDs can be played.
   • CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
   • MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
   • For details on playable CDs, refer to the Owner's Manual.

NG: CHANGE DISC 

OK: Go to next step. 

1. Check whether or not the CD is inserted upside down.

   OK: CD is properly inserted. 

NG: INSERT CD PROPERLY 

OK: Go to next step. 

1. Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.

   OK: Malfunction disappears. 

   NOTE: Do not use a conventional record cleaner or antistatic preservative.

Fig 1: Cleaning CD

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: Go to step 4 

OK: END 

1. Replace the CD with a normal one and check that the malfunction disappears.

   OK: Malfunction disappears. 

NG: REPLACE RADIO RECEIVER END 

OK: END