LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Rear Combination Light Assembly >> Disassembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Combination Light Assembly: Disassembly

  1. REMOVE REAR COMBINATION LIGHT BODY GASKET 
    1. Remove the rear combination light body gasket.
      NOTE:
      • Be sure to remove all the traces of the old gasket from the body.
      • Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
        Fig 1: Identifying Rear Combination Light Body Gasket
        G05320474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE REAR TURN SIGNAL LIGHT BULB 
    1. Turn the rear turn signal light bulb and the rear light socket and wire in the direction indicated by the arrow and disconnect them as a unit.
    2. Remove the rear turn signal light bulb from the rear light socket and wire.
      Fig 2: Rear Turn Signal Light Bulb From Rear Light Socket And Wire
      G05320475Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR LIGHT SOCKET AND WIRE 
    1. Disconnect the connector and remove the rear light socket and wire.
    Fig 3: Identifying Rear Light Socket And Wire
    G05320476Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE REAR COMBINATION LIGHT LENS AND BODY 
  5. REMOVE REAR COMBINATION LIGHT BODY GASKET 
    1. Remove the rear combination light body gasket.
      NOTE:
      • Be sure to remove all the traces of the old gasket from the body.
      • Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
        Fig 4: Identifying Rear Combination Light Body Gasket
        G05320477Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE BACK UP LIGHT BULB 
    1. Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
    2. Remove the back up light bulb from the rear light socket and wire.
      Fig 5: Identifying Back Up Light Bulb And Rear Light Socket And Wire
      G05320478Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR LIGHT SOCKET AND WIRE 
    1. Disconnect the connector.
    2. Remove the rear light socket and wire.
    Fig 6: Identifying Rear Light Socket And Wire
    G05320479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE REAR LIGHT LENS 
scientia non olet · About LEMON Manuals