LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Rear Combination Light Assembly >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Combination Light Assembly: Reassembly

  1. INSTALL REAR LIGHT LENS 
  2. INSTALL REAR LIGHT SOCKET AND WIRE 
    1. Connect the connector.
    2. Install the rear light socket and wire.
  3. INSTALL BACK UP LIGHT BULB 
    1. Install the back up light bulb.
      Fig 1: Identifying Rear Light Socket And Wire
      G05320479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL REAR COMBINATION LIGHT BODY GASKET 
    1. Remove the release paper from a new rear combination light body gasket.
      NOTE:
      • Be sure to remove all the traces of the old gasket from the body.
      • Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
        Fig 2: Identifying Rear Combination Light Body Gasket
        G05320482Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
  5. INSTALL REAR COMBINATION LIGHT LENS AND BODY 
  6. INSTALL REAR LIGHT SOCKET AND WIRE 
    1. Connect the connector and install the rear light socket and wire.
      Fig 3: Identifying Rear Light Socket And Wire
      G05320476Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL REAR TURN SIGNAL LIGHT BULB 
    1. Install the rear turn signal light bulb.
  8. INSTALL REAR COMBINATION LIGHT BODY GASKET 
    1. Remove the release paper from a new rear combination light body gasket.
      NOTE:
      • Be sure to remove all the traces of the old gasket from the body.
      • Do not reuse the removed gasket, Be sure to install a new rear combination light body gasket to prevent water ingress.
    2. Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
      Fig 4: Identifying Rear Combination Light Body Gasket Stud Bolts
      G05320484Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals